|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3230||Genuine Swiss Clone 3230 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Engine||Rolex Calibre 2836/2813|
|Dial Color||Green Dial|
Second Markers: Minute Markers around the outer rim. The design of the second minute mark around the outer edge is shown in the picture above.
Band Material: 316L. The band uses 316L to provide excellent corrosion resistance, excellent wear resistance and good wear resistance.
Luminiscence: Hands and Markers. For the replica watch, we apply with luminiscence of hands and markers. It can help you know the corresponding time in the dark.
Dial Markers: Luminous Index. We can use a watch with luminous sticks, which is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this sticks will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Clasp: Fold Over Clasp. The combination of a watch case and a bracelet watch to make it easier and quicker for the user to open and fold the case over to keep it secure.
Crystal: Sapphire Crystal. The sapphire crystal glass can block moisture and dust, protect the hands, dial and movement. Tips: The A Replica is applied with mineral glass instead of sapphire.
Water Resistance: 30 meters. Always wearing the watch even when you are in bathroom? Don’t worry, the watch’s waterproof depth is 30 meters. But make sure to close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Hand: Silver-tone. For the replica watch, we apply with hands of silver-tone, which can highly improve the outlook of the watch.
Watch Case: 316L. The raw material of this watch is the hardest 316L stainless steel, which is a highly durable and corrosion-resistant material.
Bezel Material: Stainless Steel. A luxury watch with a stainless steel bezel made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.